21
Harmony Parameters
The Detune type produces a slightly “detuned” pitch and mixes it with the input signal for
a rich chorusing effect. The amount of the detuning is set in the Mode parameter (below).
MIDI note data from a keyboard or sequencer has no effect in this type.
■ Parameter List .................................................................................
■ Parameter Descriptions ..................................................................
1. Mode
• low
Detunes the pitch by ±7 cents (least amount of detuning).
• mid-low
Detunes the pitch by ±11 cents.
• mid-high
Detunes the pitch by ±15 cents.
• high
Detunes the pitch by ±20 cents (most amount of detuning).
• When Detune is selected, the following parameters are not available:
2. Harmony Gender Type
5. Lead Pitch Correction
6. Auto Upper Gender Threshold
7. Auto Lower Gender Threshold
8. Upper Gender Depth
9. Lower Gender Depth
Other Parameters
The remaining parameters for the Detune Type are the same as those for the Vocoder
Type, described on pages 14~18.
Detune Harmony Parameters
No. Parameter Display Value Default value
1 Mode 1: low 2: mid-low 0 — 3 0
3: mid-high 4: high
2
3 Lead Gender Type off, unis, male, fem. 0 — 3 0
4 Lead Gender Depth -64 — +63 0 — 127 64
5
6
7
8
9
10 Lead/Harmony L63>H — (L=H) — L<H63 1 — 127 64
11 Vibrato Depth 0 — 127 0 — 127 39
12 Vibrato Rate 0 — 127 0 — 127 47
13 Vibrato Delay 0 — 127 0 — 127 0
14 Insertion Part off, 1 — 64, AD1 — AD64 0 — 127 127