PM1D Manager for Windows Operating manual
6
Using the application
This section explains how to start and exit PM1D Manager, and how to perform basic operations.
Starting
You can use either of the following methods to start up PM1D Manager.
1
From the Windows “Start” menu, select “Start”-
“Programs”-“YAMAHA PM1D System”-“PM1D
Manager”
2
Double-click the PM1D Manager icon that was cre-
ated during the installation.
It is not possible for multiple instances of PM1D
Manager to be running simultaneously.
Hint
You may find it convenient to set your screen display
resolution to 800 x 600, since PM1D Manager can
start up in full-screen display mode. However in this
case, the menu bar will not be displayed.
Exiting
You can use any of the following methods to exit PM1D Manager.
1
In the lower left of the Function menu screen, click
the EXIT button.
2
Open the “File” menu and select “Exit.”
3
Click the “Close” button of the window.
4
Select “Close” from the “PM1D Manager” button in
the task bar.
5
Press Alt+F4 from the keyboard.
A popup window will ask you to confirm that you
want to exit. To exit the application, click the OK
button.
If you are using PM1D Manager with an 800
×
600
pixel display, methods
2
–
4
cannot be used.
Hint
The next time PM1D Manager is started up, the state
in which you exited will automatically be restored.
Basic operation
Operation in each screen is the same as on the console
itself. Refer to “CS1D Reference Manual (Software)”
contained in the CS1D Owner’s Manual. Mention of the
console’s track pad should be read as referring to the
mouse/pointing device of your PC.