Recording Your Performances and Creating Songs — Song Creator
101
PSR-2100/1100

Recording Melodies — Step Record (Note)

In this section, we’ll show you how to use Step Recording by
guiding you through this actual music example, shown at right.
The operations here apply to step 6 on page 100.

■Play back the newly created melody

Use the [C] ( ) button to move the cursor to the beginning of the song, and press the SONG [START/STOP] button
to hear the newly entered notes. To actually enter the recorded data, press the [EXIT] button. The entered data can be
edited from the SONG CREATOR (1 - 16) display (page 108).
1
1-1 Select this note. 1-3 ...press this (to input a tie).
1-2 While holding down this note...
22-2
2-3
2-1 Select this note.
44-1 Press this button to display the dotted notes.
4-2 Select this note.
4-3
55-1 Call up the normal notes by pressing this button.
5-3
5-2 Select this note.
The notation display on the instrument (PSR-2100) may not be accurate,
especially for tied notes or longer notes. To have the notation displayed
accurately, set the gate time to tenuto by using the [H] button, and input
the notes as desired.
To input rests, simply move the measure/beat/clock location for the desired rest time, then input the next note.
3
Select this note.
Selecting a note enters a rest of the equivalent value. For example, selecting an eighth note
() here results in a eighth note rest ( ).
▲