Panel Display Indications
19
uChord
When a song (with chords) is being played back, this
indicates the current chord root and type. It also indi-
cates chords played in the ACMP section of the key-
board when the Style mode and auto accompaniment
are on.
iSong/Voice/Style name and number,
Tempo
This portion of the display indicates the name and
number of the currently selected song, voice, or style.
It also displays the name and current value or setting
of the Overall functions and the Function parameters,
as well as other important operation messages.
When the tempo setting is active, the value is shown.
oSong track indicators
In song recording and playback, these indicate the sta-
tus of the tracks. (See page 59.)
!0 Touch indicator
This appears when the Touch function is turned on.
(See page 29.)
!1 Harmony indicator
This appears when the Harmony effect is turned on.
(See page 32.)
!2 Dual indicator
This appears when the Dual function is turned on.
(See page 25.)
!3 Sync Stop indicator
This appears when the Sync Stop function is turned
on. (See page 40.)
!4 Accompaniment On indicator
This appears when the auto accompaniment has been
turned on. (See page 36.)
!5 Octave indicator
When a disk song is playing and the note data exceeds
the range limit of C1 - C6, an "OVER" indication
flashes and
Q
or
W
appears in the display.
When a disk song is playing and the octave setting is
raised or lowered, one of +2, +1, -1 and -2 indications
appears in the display.
!6 Battery Level indicator
This appears when the battery power is too low to
ensure proper operation. (See page 8.)
Music Stand
Insert the bottom edge of the included music stand into
the slot located at the top rear of the PSR-350 control
panel.