Disk Operations
75
Load
Once you’ve saved your User data onto a floppy disk, you can reload that data
back to the PSR-350. You can also load style data from the included disk or com-
mercially available Yamaha Style File disks.
1Insert the floppy disk into the disk drive.
2Press the [LOAD] button.
Press the [LOAD] button again to exit from the LOAD screen.
3Select the file to load.
Use the [+]/[-] buttons.
4Press the [EXECUTE] button.
5Execute the Load operation.
Press the [+] button (“YES”), and the Load operation will start. Once started,
the operation cannot be canceled.
As the file is loading, “Loading” will appear on the top line of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to load the file, press the [-] button (“NO”) instead of the
[+] button (“YES”).
To exit from the LOAD screen, press the [LOAD] button.
• If the [LOAD] button is pressed
when there is no floppy disk
inserted into the disk drive, a “No
disk” message appears at the top
of the display, and all disk opera-
tions will be disabled.
This case is user file. Style file indicates “L-S”.
Filename
L-U
• If the disk contains no file, the
display shows “No file” indicating
that the Load function is not pos-
sible.
Filename
L-U
• When data is loaded from a
floppy disk to the PSR-350, the
data already in the memory of
the PSR-350 will be replaced by
the data on the disk. Save impor-
tant data into a disk file before
doing the operation.
Sure?
YES
• While the file is loading (the
DISK IN USE lamp is lit), never
eject the floppy disk or turn the
power off.
Loading
L-U
Complete
---