PSR-OR700 Owner’s Manual
16
Introduction
Playing the Keyboard

Power Supply

1Make sure that the instrument’s STANDBY/ON switch is set to
STANDBY (off).
2Connect one end of the AC cable to the power adaptor.
3Connect the power adaptor’s DC plug to the instrument’s DC IN ter-
minal on the rear panel.
4Connect the other end (normal AC plug) to the nearest electrical out-
let.
WARNING
• Use the specified adaptor
(PA-301/PA-300B/PA-300 or
an equivalent recom-
mended by Yamaha) only.
• The use of an incompatible
adaptor may cause irrepara-
ble damage to the PSR-
OR700, and may even pose
a serious shock hazard!
ALWAYS UNPLUG THE AC
ADAPTOR FROM THE AC
POWER OUTLET WHEN THE
PSR-OR700 IS NOT IN USE.
CAUTION
Never interrupt the power sup
-
ply (e.g. unplug the AC adap-
tor) during any PSR-OR700
record operation! Doing so can
result in a loss of data.
CAUTION
Even when the switch is in the
“STANDBY” position, electric-
ity is still flowing to the
instrument at a minimum
level. When not using the
PSR-OR700 for an extended
period of time, be sure to
unplug the AC power adaptor
from the wall AC outlet. To electrical outlet
DC IN