Yamaha PSR-OR700 Selecting the Harmony/Echo type

Using, Creating and Editing Voices
Selecting the Harmony/Echo type
PSR-OR700 Owner’s Manual
82
Selecting the Harmony/Echo type
You can select the desired Harmony/Echo effect from a variety of types.
1Turn the [Harmony/Echo] button on.
2Call up the operation display.
[FUNCTION] → [H] HARMONY/ECHO
3Use the [1 ππ
ππ†† ††
]–[3 ππ
ππ†† ††
] buttons to select the Harmony/Echo type.
4Use the [4 ππ
ππ†† ††
]–[8 ππ
ππ†† ††
] buttons to select various Harmony/Echo set-
tings (page 83).
The available settings differ depending on the Harmony/Echo type.
Harmony/Echo Types
The Harmony/Echo types are divided into the following groups, depending on the
particular effect applied.
●Harmony Types
When one of the Harmony Types is selected, the Harmony effect is applied to
notes played in the right-hand section of the keyboard according to the type
Echo Types
These types apply echo
effects to notes played in
the right-hand section of
the keyboard in time with
the currently set tempo.
Harmony Types
These types apply the harmony
effect to notes played in the
right-hand section of the key-
board according to the chord
specified in the left-hand sec-
tion of the keyboard. (Note that
the “1+5” and “Octave” settings
are not affected by the chord.)
Multi Assign Type
This type applies a special effect
to chords played in the right-
hand section of the keyboard.
Canceling the chord sound
for the harmony effect
This cancels the sound of the
chord played in the chord range
of the keyboard — letting you
hear only the Harmony effect.
Set [ACMP] to On, set [SYNC
START] to Off, and select “Off”
for the Stop Accompaniment
parameter.