Basic Operation
Restoring the Factory-programmed Settings
PSR-OR700 Owner’s Manual
72
4Press the [8
ππ
ππ
] (OK) button to actually enter the new name and
return to the previous display.
• Deleting characters
Move the cursor to the character you wish to delete by using the DATA
ENTRY dial, and press the [7
] (DELETE) button. To delete all charac-
ters on the line at once, press and hold the [7
] (DELETE) button.
• Entering marks
1After actually entering a character by moving the cursor, press the
[6
] button to call up the mark list.
2Use the DATA ENTRY dial to move the cursor to the desired mark,
then press the [8
π
] (OK) button.
• Entering numbers
First, select one of the following: “ABC” “CASE” (half-size capital alpha-
bet) and “case” (half-size lowercase alphabet). Then, press and hold
down the appropriate button, [2
π†
]–[5
π†
], [6
π
] and [7
π
] but-
ton, for a while, or press it repeatedly until the desired number is
selected.
• Inserting a Character
1Move the cursor to the desired position.
Use the same operation as in “Deleting Characters” above.
2Press the [2
π†
]–[6
π†
], or [7
π
] buttons to enter numbers and
symbols.
3Press the [8
π
] (OK) button to enter characters.
• Entering a Space
1Move the cursor to the desired position.
Use the same operation as in “Deleting Characters” above.
2Press [6
] button to call up the mark list.
3Make sure the cursor is at the beginning space (blank) of the mark list,
and press the [8
π
] (OK) button.
Restoring the Factory-programmed Settings

Restoring the Factory-programmed System

While holding the C6 key (right-most key on the keyboard), turn the [POWER] but-
ton ON.
This operation has the same result as and is a shortcut for the System Setup restore
operation explained in step 2 of the following section.

Restoring the Factory-programmed Settings

Independently by Item

1Call up the operation display.
[FUNCTION] [J] UTILITY TAB [
][
®
] SYSTEM RESET
CAUTION
This operation deletes all your
original data for the respec-
tive item (MIDI SETUP, USER
EFFECT, MUSIC FINDER, and
FILES&FOLDERS).