Yamaha CDX-E400, RX-E400 CDX, CDPLAYER

		ADDITIONAL INFORMATION
	SYMPTOM	CAUSE	REMEDY	English
	Play does not begin.	The disc is damaged.	Check the disc carefully; replace it if necessary.
		There is moisture on the laser pick-up.	Wait 20 to 30 minutes after switching the unit ON
			before trying to play a disc.
		The disc has been loaded upside down.	Reload the disc with the label side facing up.
CDPLAYER
		The disc is dirty.	Clean the disc.
	Play is delayed, or begins at the	The disc may be scratched or damaged.	Check the disc carefully; replace it if necessary.
	wrong place.
	CD synchronized recording or	The system cable is not connected securely.	Connect the system cable properly.
E400-	Automatic recording function does
	not work.
CDX
	Sound “skips.”	The unit is being subjected to vibrations or	Relocate the unit.
		impacts.
		The disc is dirty.	Clean the disc.
	Sound “hums.”	Improper cable connections.	Securely connect the audio cables. If the problem
			persists, the cables may be defective.
	Noise from inside of the unit.	The disc may be warped.	Replace the disc.
CONTROL	The remote control does not work.	The batteries of the remote control are too	Replace the batteries with new ones.
		weak.
		Remote control is too far away or is being	Use within 6 meters and 60 degree radius.
		used at an incorrect angle.
REMOTE
		Direct sunlight or lighting (of an inverter type	Change the position of the unit.
		of fluorescent lamp, etc.) is striking the
		remote control sensor of the unit.
	TV functions strangely when the	Remote control is being used near TV set	Relocate this unit away from the TV or cover the
	remote control is being used.	with a remote control sensor.	TV’s remote control sensor.

27