GETTING STARTED
Setting the clock
You must set the clock before you use the timer functions. The clock is based on a
| STANDBY/ON DISPLAY | HOUR | MIN |
|
| |||
|
|
|
|
|
|
| VOLUME |
| NATURAL SOUND STEREO RECEIVER |
|
|
| |||
STANDBY/ON |
|
|
|
|
|
|
|
TIMER | DISPLAY | MEMORY | AUTO/MAN'L PRESET/BAND | PRESET/TUNING | MIN | MAX | |
|
|
|
|
| |||
|
| TIMER ADJ | TIMER | HOUR | MIN |
| INPUT |
|
|
|
|
|
|
| |
|
| BASS | TREBLE | BALANCE |
|
| |
PHONES |
|
|
|
|
|
|
|
| – | + | – + | L | R |
|
|
| TIME ADJ | PRESET/BAND |
|
| |||
1 Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control.
2 While the power is on, press DISPLAY to display the time.3 While holding TIME ADJ, press HOUR to set the hour.•If you want to move the time in the reverse direction, press HOUR while holding TIME ADJ and PRESET/BAND.
4 While holding TIME ADJ, press MIN to set the minutes.•If you want to move the time in the reverse direction, press MIN while holding TIME ADJ and PRESET/BAND.
To display the clock
Press DISPLAY.The current time appears for about 8 seconds, then the normal display returns. Some buttons and controls may not work while the current time is displayed.
Note
•In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock.
Adjusting the brightness
of the display
You can adjust the brightness of the display. If you have connected the CD player
DISPLAY
|
|
|
|
|
|
|
| VOLUME |
| NATURAL SOUND STEREO RECEIVER |
|
| |||||
STANDBY/ON |
|
|
|
|
|
|
|
|
TIMER | DISPLAY | MEMORY | AUTO/MAN'L | PRESET/BAND | PRESET/TUNING | MIN | MAX | |
|
| TIMER ADJ | TIMER |
| HOUR |
| MIN | INPUT |
|
|
|
|
|
|
|
| |
|
| BASS | TREBLE |
| BALANCE |
|
| |
PHONES |
|
|
|
|
|
|
|
|
| – | + | – | + | L | R |
|
|
Press and hold DISPLAY for about two seconds so that “Dimmer ±0” appears on the display. While holding DISPLAY, turn INPUT clockwise to increase or counterclockwise to decrease brightness.
Control Range: ±0 to6