Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 18.

CENTER

LEVEL

0 l0

Note

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear speakers even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 18.

REAR

LEVEL

0 l0

Notes

This adjustment is useful only when the digital sound field program DOLBY PRO LOGIC or DOLBY 3 STEREO is selected.

Adjustment of DELAY TIME

●If no digital sound field program is used, this adjustment is useless.

●When the digital sound field program DOLBY 3 STEREO is selected, this adjustment is useless.

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers.

The larger the value, the later the effect sound is generated.

This adjustment can be made to all programs (except 3 STEREO) individually.

Control range

 

 

 

 

 

 

PRO LOGIC

: from 15 to 30 milliseconds

 

 

 

 

 

 

 

 

 

 

 

(Preset value:

20 milliseconds)

LIVE HOUSE

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

HALL

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

30 milliseconds)

BALLAD

: from 1 to 50 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

POPS

: from 1 to 50 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

JAZZ

: from 1 to 50 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

ROCK

: from 1 to 50 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

Use the remote control transmitter for adjusting delay time.

1 Press once or more so that “DELAY” appears on the display.

DELAY

/KEY

ms

2 By continuously pressing the “+” or “–” side of the TIME/KEY button, the value changes continuously.

The value stops changing momentarily at the preset point.

–TIME + /KEY

ms

Adjustable

*When the TIME/KEY button is pressed, sound is momentarily interrupted.

Note

Adding too much delay will cause an unnatural effect with some sources.

Notes

The value of the delay time you set the last time will remain memorized even when the power of this unit is off.

However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings.

28