Begin singing Karaoke.

Adjusting key of the tune currently playing

English

Pressing the KEY CONTROL button changes key of the tune currently playing. The current key level is shown on the display. Whenever a tune changes, its original key level is restored.

Control range: –6 to –1, 0, +1 to +6

To operate on the front panel:

KEY CONTROL

To operate on the remote control transmitter:

1 Press once or more so that “KEY” appears on the display.

DELAY

/KEY

2 By continuously pressing the “+” or “–” side of the TIME/KEY button, the value changes continuously.

(Left side) : Whenever this side is pressed, key of the tune becomes lower in 6 steps.

(Right side) : Whenever this side is pressed, key of the tune becomes higher in 6 steps.

–TIME +

/KEY

Adjustable

Notes

The key level you have adjusted is automatically reset to “0” by the following operations.

●Changing the selected input source to another by pressing an input selector button.

●Turning the power to this unit off by pressing the POWER switch.

Recording your vocal mixed with the source onto a tape (adding effects of a selected DSP program for Karaoke and other Karaoke functions)

Only when a DSP program for Karaoke (BALLAD, POPS, JAZZ or ROCK) is selected or the DSP is turned off (so that “E. OFF” appears on the display), you can record your vocal input from the microphone(s) connected to this unit along with the source onto a tape (or MD) by using the tape deck, VCR, etc. connected to the TAPE (MD) REC OUT and/or VCR OUT terminals on the rear of this unit.

In addition, an effect sound of the selected DSP program for Karaoke and effects of Karaoke functions (VOCAL AID, ONE TOUCH KARAOKE, MIC LEVEL, ECHO and/or KEY CONTROL) can also be recorded with the vocal and the source.

To record:

1 Select the source to be recorded by pressing the corresponding input selector button.

2 Prepare to sing Karaoke by using microphone(s).

3 If you want to record an effect sound of DSP program for Karaoke together, select the corresponding program.

If you want to record effects of Karaoke functions (VOCAL AID, ONE TOUCH KARAOKE, MIC LEVEL, ECHO and/or KEY CONTROL) together, turn the corresponding functions on or make adjustments on them.

4 Confirm that “TAPE MON” is not illuminated on the display. If “TAPE MON” is illuminated, extinguish it by pressing the TAPE (MD) MONITOR button on the front panel.

If “TAPE MON” is illuminated, your vocal, effect sound of the selected DSP program for Karaoke and effects of Karaoke functions cannot be recorded.

5 Play the source and then turn the VOLUME control up to confirm the input source.

6 Begin recording on the tape deck (or MD recorder etc.) or VCR connected to this unit.

7

Notes

●An effect sound of the selected DSP program output from the main speakers can be recorded along with your vocal, however, an effect sound output from the rear speakers cannot be recorded.

●If “VCR” is selected as the input source, recording cannot be made by using the VCR etc. connected to the VCR OUT terminals on the rear of this unit.

31