BASIC SYSTEM SETTINGS

The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND” menu instead of those under the “BASIC” menu (see page 41 to 44). Altering any parameters in the “BASIC” menu will reset all parameters in the “SOUND” menu.

Using the basic menu

Use the remote control to make adjustments.

Press SPEAKERS A/B/OFF on the front panel to select the front speakers you want to use.

Make sure you disconnect headphones from this unit.

 

MUTE

 

 

LEVEL

VOLUME

SET MENU

1

 

 

2-4,61Press SET MENU.

“BASIC MENU” appears on the front panel display.

SET MENU

BASIC MENU

If the front panel display changes to show anything other than “BASIC MENU”, press SET MENU until it displays “BASIC MENU”.

2Press –/+ to enter into the BASIC menu.

“1 SETUP” appears on the front panel display.

1 SETUP
3Press u/ dto change the display to the setting you want to alter.1 SETUP

Changes the speaker and amplifier settings to suit the size of the room you are using. Refer to “Setting the unit to match your speaker system” on page 21 for more information.

2 SP LEVEL

Adjusts the output levels of the speakers. Refer to “SP LEVEL” on page 21 for more information.

4Press –/+ to enter the desired setting mode.5Change the unit settings to suit your listening environment.6Press u/ dto exit from the set menu.

The front panel display changes in the following order:

Exit

BASIC

↓↑

SOUND

↓↑

INPUT

↓↑

OPTION

Exit

PREPARATION

English

19