SOUND 2 SP DISTANCE
(speaker distance)
Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time.
1Press u/ dto select “UNIT”.
2Press –/+ to select the unit “meters” or “feet” to be used in setting.
3Press u/ dto select a speaker.
4Press –/+ to set the distance.
Press – for higher values and + for lower values.
SET MENU
SOUND 3 LFE LEVEL
Use to adjust the output level of the LFE
Control range: |
|
SP LFE (Speaker) ............. | |
HP LFE (Headphone) ....... | |
Initial setting: 0 dB |
|
1Press u/ dto select the item to be adjusted.
2Press – to adjust the LFE level.
Note
•Adjust the LFE level according to the capacity of your subwoofer or headphones.
C
L C R
SLSR
■Setting by “meters”
Control range: | 0.3 to 24.0 m (for front L/R, center, |
| surround L/R) |
Initial settings: | 3.00 m (for front L/R, center, |
| surround L/R) |
SOUND 4 D. RANGE
(dynamic range)
Use this feature to adjust the dynamic range. This setting is effective only when the unit is decoding Dolby Digital signals.
Choices: MIN (minimum), STD (standard), MAX (maximum)
MIN
Select MIN for listening to sources at low volume levels.
STD
Select STD for general use.
MAX
Select MAX for feature films.
OPERATION | ADVANCED |
|
|
■Setting by “feet”
Control range: | 1.0 to 80.0 ft (for front L/R, center, |
| surround L/R) |
Initial settings: | 10.0 ft (for front L/R, center, |
| surround L/R) |
Note
•No delay will be set if you set the same distance for the front L/R and center, or the surround L/R.
English
43