SETTING THE SPEAKER LEVELS

Adjusting the speaker levels

during playback

You can adjust the output level of each speaker while listening to sound playback.

 

PROG

PROG

 

 

MUTE

1

LEVEL

SET MENU

 

VOLUME

 

 

2

Using the test tone

Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position.

 

q/DTS 6.1/5.1 NIGHT

SLEEP

1,4

TEST

STEREO

VOLUME

 

PROG

PROG

 

MUTE

 

 

LEVEL

SET MENU

 

VOLUME

 

2,3
1Press LEVEL repeatedly to select the speaker you want to adjust.

The unit cycles through the speakers in the following order each time you press LEVEL:

FRONT LCENTERFRONT R

SUR R. (surround R)SUR L. (surround L)SWFR (subwoofer).....

y

Pressing LEVEL once opens the level display. Press u/ dat this time to select a speaker.

2Press –/+ to adjust the speaker output level.

The center and surround speakers can be adjusted by a maximum of –10dB ~ +10dB.

The front speakers and subwoofer can be adjusted by a maximum of –20dB ~ 0dB.

Notes

You cannot adjust speaker levels if the “SOUND 1 SPEAKER SET” parameter in the set menu is set to NONE.

You cannot adjust the subwoofer level if the “1D BASS” parameter in “SOUND 1 SPEAKER SET” in the set menu is set to FRNT.

If you use LEVEL to adjust speaker levels, the speaker levels you previously set with the test tone will also change.

If you select “BASIC 1 SETUP” in the set menu and then select “SET”, speaker levels change in response to any changes you make in ”BASIC 1 SETUP”.

1Press TEST.

The unit will output a test tone.

2Press u/ drepeatedly to select a speaker to adjust.

Each time you press d, the unit will cycle through the speakers in the following order:

TEST LEFT (front L)TEST CENTER (center)TEST RIGHT (front R)TEST SUR.R (surround R)TEST SUR.L (surround L)TEST SUBWOOFER (subwoofer).....

(Press uto cycle the speakers in the reverse order.)

3Press –/+ to adjust the speaker output level.4Press TEST when you have completed your adjustment.

The test tone halts.

Notes

You cannot enter test mode if headphones are connected to the PHONES jack. Remove the headphones from the PHONES jack.

You cannot adjust speaker volumes if the “SOUND 1 SPEAKER SET” parameter on the set menu is set to NONE.

You cannot adjust the subwoofer level if the “1D BASS” parameter in “SOUND 1 SPEAKER SET” in the set menu is set to FRNT.

If you select “BASIC 1 SETUP” in the set menu and then select “SET”, speaker levels change in response to any changes you make in “BASIC 1 SETUP”.

y

Depending on the source the unit is reproducing, the speaker levels set with the test tone may not be to your liking. If this is the case, adjust the speaker levels while listening to the source.

OPERATION

ADVANCED

 

 

English

47