See “REMOTE CONTROL TRANSMITTER” on page 49 for full details.
1Component selector
Press the button for the component you want to control with the remote control transmitter. (The proper code must be set for your component. See “SETUP CODES” on page 56.)
When the component selector has been pressed, the remote control transmitter is set to operate that component.
2POWER
When you have preset the code for a YAMAHA component, this button switches between the power on and standby mode. When you have preset the code for another manufacturer’s component, this button turns on that component if it has a remote control transmitter with a power button.
* It only functions when AMP<TUNER>, TAPE/MD, CD, DVD/LD or
DVD MENU on the component selector has been pressed.
3TEST
Press this button to output the test tone for each speaker.
* It only functions when AMP<TUNER> on the component selector has
been pressed.
4A/B/C/D/E, PRESET +/–
These buttons are used to select a preset station.
* They only function when AMP<TUNER> on the component selector
has been pressed.
5MUTE
Press this button to mute the sound.
6VOLUME
These buttons are used to adjust the volume. 
: Turns up the volume.
: Turns down the volume.
7SLEEP
This button is used to set the SLEEP timer.
8PRG+, PRG–
These buttons are used to select a DSP program.
* They only function when AMP<TUNER> on the component selector
has been pressed.
9Indicator
This flashes in red when a button on the remote control transmitter is pressed. When it flashes rapidly several times, press the selected button again.
0Input selector (1 to 9)1)/Numeric buttons2)
1) These buttons are used to select the program source to be played.
* They only function when AMP<TUNER>, TAPE/MD, CD or
DVD/LD on the component selector has been pressed.
2) These buttons are used to select the menu or channel.
* They only function when DVD MENU, VCR, CBL/DBS or TV on
the component selector has been pressed.
10