CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

English

1STANDBY/ON

Press this switch to turn on the power to this unit. Press it again to set this unit to the standby mode.

Standby mode

In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control transmitter.

2Remote control sensor

This receives signals from the remote control transmitter.

3Display

This shows various information. (Refer to page 9 for details.)

4MEMORY (MAN’L/AUTO FM)

Press this button to store the broadcasting stations. When this button is pressed and held for more than three seconds, the automatic preset tuning begins.

5EDIT

This button is used to exchange the assignment of two preset stations with each other.

6TUNING MODE (AUTO/MAN’L MONO)

Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that the “AUTO TUNING” indicator lights up on the display. To select the manual tuning mode, press this button so that the “AUTO TUNING” indicator goes off.

7FM/AM

Press this button to switch the reception band to FM or AM.

8TUNING UP/DOWN

This button is used for tuning. Press the UP side to tune in to higher frequencies, and press the DOWN side to tune in to lower frequencies.

9TAPE/MD MON / EXT. DECODER

Press this button to play a tape or an MD. The “TAPE/MD MON” indicator lights up on the display.

When you press the button next, the “TAPE/MD MON” indicator goes off, “EXT. DECDR” appears on the display and you can play the signal connected to the EXTERNAL DECODER INPUT terminals.

0INPUT

Turn this selector to select the program source (VCR, VIDEO AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) to listen to or watch.

The name of the selected program source appears on the display.

7