DISPLAY PANEL

English

1Multi-information display

This displays various information, for example the station frequency, preset station number and name of the selected program source.

2MEMORY indicator

When MEMORY is pressed, this indicator flashes for about five seconds. During this period, the displayed station can be stored in the memory.

3AUTO TUNING indicator

This lights up when the unit is in the automatic tuning mode.

4TAPE/MD MON indicator

This lights up when the tape deck (or MD recorder, etc.) is selected as the program source by pressing TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control transmitter.

5STEREO indicator

This lights up when an FM stereo broadcast with sufficient signal strength is being received.

6Signal-level meter

This indicates the signal level of the station being received.

If multipath interference is detected, the indication decreases.

7RDS mode indicators

The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of one of the named indicators shows that the corresponding RDS mode is now selected.

8, and indicators

“” lights up when the built-in Dolby Digital decoder is on and the signal of the selected source encoded in Dolby

Digital sound is not in 2-channel. “” lights up when the

built-in digital sound field processor is on, and “” lights up when the built-in Dolby Pro Logic Surround decoder is

on. Depending on the selected DSP program, both “”

and “”, or both “” and “” will light up.

9PTY HOLD indicator

This lights up while a search is being performed in the PTY SEEK mode.

0EON indicator

This lights up when an RDS station that employs the EON data service is being received.

qProgram type name indicators

The name selected in the EON mode lights up.

wSLEEP indicator

This lights up while the built-in SLEEP timer is functioning.

9