4 Set BASS, TREBLE and BALANCE to the “0” position.

Front panel

5 Press TEST so that “TEST LEFT” appears on the display.

Remote control

6 Turn up the volume.

Remote control

You will hear a test tone (like pink noise) from each speaker for about two seconds in following order: left main speaker, center speaker, right main speaker, right rear speaker and left rear speaker. The display changes as shown below.

Main (L)

Center

Main (R)

Rear (R)

Rear (L)

*If the function “CNTR” in the SET MENU mode is set to the NONE position, you will hear the center channel test tone from the left and right main speakers.

7 Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same.

Front panel

24