Yamaha RX-V650 Selecting input modes, Straight, Downmixing to 2 channels, Virtual Cinema DSP

PLAYBACK

■Downmixing to 2 channels

You can enjoy 2-channel stereo playback even from multi- channel sources.

Rotate PROGRAM (or press STEREO on the remote control) to select 2ch Stereo.

PROGRAM	STEREO	HALL	JAZZ	ROCK
	1	2	3	4
or	MUSIC	ENTERTAIN	TV THTR	MOVIE
	5	6	7	8
	q/DTS	NIGHT	EX/ES	STRAIGHT
	9	0	10	ENTER
	Remote control			EFFECT
Front panel

Selecting input modes

This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use.

1Rotate INPUT to select the input source.

INPUT

2ch Stereo

y

You can use a subwoofer with this program when SWFR or BOTH is selected in “BASS OUT”.

2Press INPUT MODE to select an input mode. In most cases, use AUTO.

INPUT MODE

■Listening to unprocessed input signals

In STRAIGHT mode, two channel stereo sources are output from only the front left and right speakers. Multi- channel sources are decoded straight into the appropriate channels without any additional effect processing.

Press STRAIGHT (EFFECT) to select STRAIGHT.

STRAIGHT		STRAIGHT
	or	ENTER
EFFECT		EFFECT
Front panel		Remote control

STRAIGHT

Press STRAIGHT (EFFECT) again so that “STRAIGHT” disappears from the display when you want to turn the sound effect back on.

■Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field.

If you do not connect surround speakers, Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP sound field program.

Note

Virtual CINEMA DSP will not activate, even when “SURR L/R SP” is set to NONE (see page 56) in the following cases:

–When MULTI CH INPUT is selected as the input source.

–When headphones are connected to the PHONES jack.

t

96

DVR/VCR2

VCR1 V-AUX

DTV/CBL

DVD MD/CD-R TUNER CD

24

SILENT CINEMA

SP NIGHT ZONE2

PTY HOLD AUTO TUNED STEREO MEMORY

MUTE VOLUME

MATRIX DISCRETE

q DIGITAL

VIRTUAL

A B

HiFi DSP

q EX

q PL

SLEEP

PS PTY RT CT EON

dB

10DVD

D

AUTOO00dB

96/24

PCM

q PL

q PL x

ft

L C R

mS

LFE SL SB SR

Input source

Input mode

AUTO

Automatically selects input signals in

the following order:

	1)	Digital signals*
	2)	Analog signals
DTS	Selects only digital signals encoded in
	DTS. If no DTS signals are input, no
	sound is output.
ANALOG	Selects only analog signals. If no
	analog signals are input, no sound is
	output.

*If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program.

y

You can adjust the default input mode this unit selects when the power is turned on (see page 61).

36