Yamaha RX-V650 owner manual SET Menu, Sound Menu, Input Menu, Option Menu

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■AUTO SETUP

Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 25).

■MANUAL SETUP

Use to manually adjust speaker and system parameters.

1 SOUND MENU

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors.

y

Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 25). You can use SOUND MENU to make further adjustments, but we recommend running auto setup first.

Item	Features	Page
A)SPEAKER SET	Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over	56
	frequency.
B)SPEAKER LEVEL	Adjusts the output level of each speaker.	58
C)SP DISTANCE	Adjusts the delay time of each speaker.	58
D)CENTER GEQ	Adjusts the tonal quality of the center speaker.	59
E)LFE LEVEL	Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.	59
F)DYNAMIC RANGE	Adjusts the dynamic range for Dolby Digital or DTS signals.	59
G)AUDIO SET	Customizes the muting level, audio delay and height of the front and center channel sounds.	59
H)PR/SB SELECT	Selects priority to either surround back or presence speakers when both sets of speakers are	60
	connected to this unit.

2 INPUT MENU

Use to reassign digital input/outputs and select the input mode.

Item	Features	Page
A)I/O ASSIGNMENT	Assigns jacks according to the component to be used.	60
B)INPUT MODE	Selects the initial input mode of the source.	61

3 OPTION MENU

Use to adjust the optional system parameters.

Item	Features	Page
A)DISPLAY SET	Adjusts the brightness of the display and converts video signals.	61
B)MEMORY GUARD	Locks sound field program parameters and other SET MENU settings.	62
C)PARAM. INI	Initializes the parameters of a group of sound field programs.	62
D)ZONE SET	Specifies the location of the speakers connected to the SPEAKERS B terminals.	62

54