Yamaha RX-V901 SPEAKER BALANCE ADJUSTMENT

SPEAKER BALANCE ADJUSTMENT

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory.

<For U.S.A., Canada and Australia models only>

Use the remote control transmitter with the YPC-USER-LEARNswitch on it set to the YPC position.

			<U.S.A., Canada and
4	5	1	Australia models>
			SEARCH		STOP	PLAY	TAPE MON
			REC MUTE	REC/PAUSE	DIR A	DIR B
			SEARCH		PAUSE/STOP	PLAY	LD/TV
			CHAPTER/CH		DISPLAY	STOP	VCR 1
		5	PRO LOGIC	ENHANCED	CONCERT	MONO	VCR 2
			PRO LOGIC	ENHANCED	VIDEO	MOVIE	VCR 2
			1	2	3	4
			SURROUND
			STADIUM	DISCO	ROCK	HALL	V–AUX
			5	6	7	8
				DSP		EFFECT	MASTER
				DSP		ON/OFF	MASTER
						ON/OFF	VOLUME

<General model>

	REC PAUSE	DIR A	PLAY	DIR B	TAPE MON
	TEST		STOP		LD/TV	5
		PRO LOGIC	ENHANCED CNCT VIDEO		VCR 1
	CENTER	SUR.
	CENTER	MONO MOVIE	STADIUM	DISCO	VCR 2
	LEVEL	MONO MOVIE	STADIUM	DISCO	VCR 2
		ROCK	HALL	EFFECT	V AUX
		ROCK	HALL	ON/OFF	V AUX
	REAR	DELAY TIME		VOLUME
	LEVEL	DELAY TIME		VOLUME

2 3

1

Set to the “∞ ” position.

2 Select the front speakers to be used.

SPEAKERS

A B

ON ON

OFF OFF

*If you use two front speaker systems, press both the A and B switches.

3

BASS		TREBLE		BALANCE
l	0	l	0	l	0
l	l	l	l	l	l
2	2	2	2	2		2
3	3	3	3	3		3
4	4	4	4	4		4
5	5	5	5	L 5	5	R

4

POWER

5 Select the PRO LOGIC or PRO LOGIC ENHANCED mode, so that the corresponding name is illuminated on the display.

DIGITAL SOUND FIELD PROCESSOR

				CONCERT	MONO
PRO LOGIC ENHANCED VIDEO					MOVIE STADIUM

CONCERT

HALL EFFECT

Set to the “0” position.

12

Contents

OWNER’S MANUAL CONTENTS SAFETY INSTRUCTIONS Note to CATV system installer: Caution: Read this before operating your unit We Want You Listening For A Lifetime FEATURES SUPPLIED ACCESSORIES PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) CONNECTING SPEAKERS How to Connect: ABOUT THE ACCESSORY TERMINALS AC OUTLET(S) (SWITCHED) GND terminal (For turntable use) LOW PASS terminal FRONT OUTPUT terminals ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT CONTINUED Page BASIC OPERATIONS TO PLAY A SOURCE TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) When you listen with headphones TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING To store stations EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) Front Panel Remote Control Transmitter Description of Each Sound Field Program Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER NOTES ABOUT THE REMOTE CONTROL TRANSMITTER KEY FUNCTIONS <U.S.A., Canada and Australia models <General model For Other Component Control For Control of This Unit REMOTE CONTROL “LEARNING” FUNCTION (U.S.A., Canada and Australia models only) To Learn a New Function To Clear a Learned Function To Clear All Learned Functions Trouble shooting guide TROUBLESHOOTING SPECIFICATIONS AUDIO SECTION VIDEO SECTION FM SECTION AM SECTION