Yamaha RX-V901 FEATURES, SUPPLIED ACCESSORIES

FEATURES

●5 Speaker Configuration

Front: 85W + 85W (8Ω ) RMS Output Power, 0.07% THD, 1 kHz

Center: 85W (8Ω ) RMS Output Power, 0.07% THD, 1 kHz

Rear: 20W + 20W (8Ω ) RMS Output Power, 0.3% THD, 1 kHz

●Digital Sound Field Processor

6 Programs for Digital Sound Field Processing

2 Programs for Dolby Surround Decoding (DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED)

●Automatic Input Balance Control for Dolby Surround

●Test Tone Generator for Easier Speaker Output Balance Adjustment

●3 Center Channel Modes (NORMAL/WIDE/PHANTOM)

●40-Station Random Access Preset Tuning

●Automatic Preset Tuning

●Preset Station Shifting Capability (Preset Editing)

●IF Count Direct PLL Synthesizer Tuning System

●Video Signal Input/Output Capability

●SLEEP Timer

●Remote Control Capability

SUPPLIED ACCESSORIES

After unpacking, check that the following parts are contained.

Remote Control Transmitter		Batteries (size AA, R6, UM-3)	Indoor FM Antenna
<U.S.A., Canada	<General model>
and Australia models>

User Program Sheets

AM Loop Antenna

4

Contents

OWNER’S MANUAL CONTENTS SAFETY INSTRUCTIONS Note to CATV system installer: Caution: Read this before operating your unit We Want You Listening For A Lifetime FEATURES SUPPLIED ACCESSORIES PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) CONNECTING SPEAKERS How to Connect: ABOUT THE ACCESSORY TERMINALS AC OUTLET(S) (SWITCHED) GND terminal (For turntable use) LOW PASS terminal FRONT OUTPUT terminals ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT CONTINUED Page BASIC OPERATIONS TO PLAY A SOURCE TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) When you listen with headphones TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING To store stations EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) Front Panel Remote Control Transmitter Description of Each Sound Field Program Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER NOTES ABOUT THE REMOTE CONTROL TRANSMITTER KEY FUNCTIONS <U.S.A., Canada and Australia models <General model For Other Component Control For Control of This Unit REMOTE CONTROL “LEARNING” FUNCTION (U.S.A., Canada and Australia models only) To Learn a New Function To Clear a Learned Function To Clear All Learned Functions Trouble shooting guide TROUBLESHOOTING SPECIFICATIONS AUDIO SECTION VIDEO SECTION FM SECTION AM SECTION