To Learn a New Function
1
USER
YPC 
LEARN
Set to the “LEARN” position.
2 Press a key on this unit where a new function will be learned.
This unit
Other remote control transmitter
About
3 Press and hold the key (on the other remote control transmitter) where the desired new function is.
Lights up.
*When the TRANSMIT/LEARN indicator stops lighting, the learning is finished.
4 Repeat step 2 and 3 until all desired functions are successfully learned.
5 Set to the “USER” position.
USER
YPC 
LEARN
Try operating your components.
Notes
●When you operate the desired component with this remote control transmitter, TRANSMIT/LEARN indicator will flash steadily.
●The originally preset function of a key is still available in the USER position if a new function has not been learned to the key.
●Successful learning to a key results in the erasure of previously learned functions and their replacement by the newly learned ones.
●If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash on and off. In this case, even if some keys are not occupied with functions from other remote control transmitters, no further learning is possible.
Memory
All of the learned functions will be retained while you replace the batteries. However, if no batteries are installed for a few hours, the learned functions will be erased and will have to be learned again.
31