17
Playing the Preset Patterns
•FILL BA - This section is used to make the transition back to the
verse/chorus section from the bridge section. When it has
completed playing, it switches to “MAIN A”.
There is also a finale section:
•ENDING - As its name implies, this section ends the pattern play
when it is complete.
You can select a section before you start playing a pattern. For example,
select the “INTRO” section of the pattern. After you have started the
pattern playing, you can select other sections.
1Press and hold the [SECTION] button, then press the Drum Pad button for
the section you want to play. The appropriate Section indicator lights up,
for example, the “INTRO” indicator.
There are labels below the lower row of drum pads indicating the different
sections.
2Start playing the pattern by pressing the [ PLAY ] button. The green Play
LED will flash to the current tempo setting and the pattern will begin
playback.
The “INTRO” section plays, automatically followed by the “MAIN A” section.
3Select another section. For example, select the “MAIN B” section. Press and
hold the [SECTION] button. Then press the [8 - SIDE STICK] drum pad button,
which corresponds to the “MAIN B” section.
NOTE
When the “ENDING” section has completed, it stops the playback and sets the RY20
back to “MAIN A” to prepare for playing the next pattern.
NOTE
When you select a section other than the two transition sections, the newly selected
section will begin playing after the current section has finished playing.
SECTION
BD
6
INTRO
BD
6
SD
7
SIDE
STICK
8
HH
PEDAL
9
HH
CLOSED
10
CRASH
11
INTRO MAIN A MAIN B FILL AB FILL BA ENDING
SECTION
SIDE
STICK
8
MAIN B