56
Other Pattern Functions
3Select the section of the pattern you want to clear. Press and hold the
[SECTION] button, then press the appropriate Drum Pad button. The
appropriate Section indicator lights up, for example, the “INTRO
indicator.
4Select the tracks you wish to clear with the Track Select/Mute buttons.
Notice as you press a button, the track “ ” indicator for the corresponding
track lights up.
If you select a track by accident, just press the button again to switch it
off.
5Clear the selected tracks in the current section by pressing the [ ENTER ]
button. The “END” prompt will momentarily appear on the LCD.
When you see the “END” prompt, the RY20 has finished clearing the
selected tracks.
NOTE
You can also select the Clear display page by pressing the [ PAGE+ ] or [ PAGE– ]
buttons.
IMPORTANT
If you decide that you DO NOT want to clear the pattern, you can cancel this
operation by simply selecting another function. There are several ways to do this:
Press the [PATTERN] button to return to Pattern Mode.
Press the [ PAGE+ ] or [ PAGE– ] buttons to select another display page.
NOTE
If the selected pattern contains a lot of data, you may see the prompt
PLEASE WAIT” as the RY20 clears the data from the pattern.
PAGE – PAGE +
OTHERS
HH
SD
BD
TRACK
SELECT/
MUTE
PATTERN
A CHASEPAD BANK
OTHERS
HH
SD
BD
ENTER