40
Recording a User Pattern
1Press the [PATTERN] button to place the unit in Pattern Mode.
Select a pattern by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
2Start recording by pressing the [RECORD] button. The red Record LED
lights and the “QUANTIZE” indicator and the current position “ ” indicator
both flash.

LCD Panel

The following illustration points out some key indicators on the LCD
panel when the RY20 is in Pattern Record Mode.
The Entry Location shows, from left to right, the measure, beat, and
clock number of the pattern section. These parameters show you which
location you are currently at.
In real-time record, this is the only visual indication you have of the
location of the current position.
The Level Prompt shows the recorded level of the pad at the current
insert location. If there is no event recorded at this location, the display
shows “---”. You can edit the level of each recorded note at any time
during Pattern Record Mode.
The Pattern Display is the section of the LCD panel that shows the
pattern data and status. See below.
The Quantize Prompt and Quantization Icon show the current
quantization level. See page 44 for further details.
PATTERN
PATTERN
A CHASE
MEAS BEAT
CLOCK
LEVEL
QUANTIZE
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
Entry Location
Section Indicator
Pattern Display
Quantize Prompt
Level Prompt
Pad Number Prompt
Voice Name
Quantization Icon