MODES & FUNCTIONS
52
■DELETING A CHORD BY PART -
After recording a song, you can go back
and delete an unwanted chord at any time at a specific part, or measure
location. First, in Song Record Mode, press [CHORD] to access Chord
Assign. Next, locate the measure containing the chord you want to
delete, by pressing [FWD] and [BWD]. Then, hold [MODE] and press
[PAGE+] once. The abbreviation “DEL” (Delete) will appear in the upper
left area of the LCD, and the word “SURE?” will appear in the lower left
area of the LCD. Finally, press [ENTER] to delete the chord data.
The pattern and chord tracks are independent! When deleting a chord by part, the succeeding
parts will be moved up by one part. Therefore, take care that your chord deletions don’t alter your
song structure in relation to the pattern track.
■INSERTING A CHORD -
After recording a song, you can go back and
insert a chord at any time. First, in Song Record Mode, press [CHORD] to
access Chord Assign. Next, locate the measure in which you want to
insert the new chord, by pressing [FWD] and [BWD]. Then, hold [MODE]
and press [PAGE+] twice. The abbreviation “INS” (Insert) will appear in the
upper left area of the LCD, and the word “SURE?” will appear in the lower
left area of the LCD. Press [ENTER] to insert a blank part. Finally, go back
to the Chord Assign and insert the chord data.
REC TOP BWD STOP PLAY FWD
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM 3 CLOSED1
CLOSED2
HH OPEN
HH
HH
RIDE
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
ENTER
234510
89101176
03_ModesE.qx 6/21/00 2:23 PM Page 52