Yamaha RY9 - page 68

■SETTING THE STEREO PAN POSITIONS - You can designate the stereo pan
position for each pad in a User drum kit. Hold [MODE] and press [PAGE+] or
[PAGE-] to access the Pan function. The word “PAN” will appear in the lower
left area of the LCD, and the pan setting of the currently selected pad will
be flashing. Press any drum pad (within either the Drum or Percussion Pad
Bank) to select it. Press [-1] and [+1] to change the pan setting from
between “-7” and “+7”, or “OFF”. If you select “OFF”, then the default pan
position for the drum voice will be designated. (As you change the pan
settings, you can hit the pad in order to hear the effect of the pan change.)
After you’ve set the pan position for the first pad, simply select a different
pad and repeat the procedure until you have set the pan positions for all
voices in your User drum kit.
■TUNING THE PITCH OF THE DRUMS - You can designate the pitch tune
setting for each pad in a User drum kit. Hold [MODE] and press [PAGE+] or
[PAGE-] to access the Tune function. The word “TUNE” will appear in the
lower left area of the LCD, and the tune setting of the currently selected
pad will be flashing. Press any drum pad (within either the Drum or
Percussion Pad Bank) to select it. Press [-1] and [+1] to change the pitch
tune setting from between “-7” and “+7”, where “0” represents the normal
pitch of the drum sound. (As you change the tune settings, hit the pad in
order to hear the effect of the pitch change.) After you’ve set the pitch
tuning for the first pad, simply select a different pad and repeat the
procedure until you have set the tuning for all voices in your User drum kit.
ENTER
ENTER
60
MODES & FUNCTIONS
PDF03_E.qx 6/2/99 5:51 PM Page 60