S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor Owner’s Manual 20
Rcv Channel (Receive Channel)
Determines the MIDI Receive Channel for each Part.
Output Select
Determines the specific output(s) for the individual Part. The following settings are available.
* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be
output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is
indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select
parameter on the S90 XS/S70 XS Editor.
ARP (Arpeggio)
Turns Arpeggio playback on or off for each Part.
nUp to four Parts can play back the Arpeggio simultaneously.
When [AD Part] is selected:
This section lets you edit parameters for the A/D Part in the Multi mode. Clicking “AD” row turns this
section on as illustrated below.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part by using the
knob icons.
Volume
Adjusts the Volume for the A/D Part.
Output Select
Determines the specific output(s) for the A/D Part. The available settings are the same as those of the
A/D Part in the Voice mode. Refer to page 16.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
drum See below* See below*