TX6n/5n/4n Reference Manual 29
Panel Operations
Limiter

Here you can specify the limiter conditions for the amplifier.

Voltage Limiter

These settings specify how the limiter will be controlled by the output voltage.

Power Limiter

These settings specify how the limiter will be controlled by the output power.

Limiter Gain Reduction

Parameter name Range Explanation
On ON/OFF Turns the voltage limiter on/off.
Threshold 0.0–45.0 dBu Specifies the upper threshold value for the output voltage.
Attack 1–100 ms Specifies the time over which 20 dB of attenuation will be applied after
the threshold value is exceeded.
Release 0.01–10.00 s Specifies the time over which the voltage that had been attenuated will
be returned to the original level after falling back to below the threshold
value.
Parameter name Range Explanation
On ON/OFF Turns the power limiter on/off.
Threshold TX6n: 10–4800 W
TX5n: 10–4200 W
TX4n: 10–3600 W
Specifies the upper threshold value for the output power.
Parameter name Range Explanation
A/B Link ON/OFF Specifies whether the limiter will be linked between channels. If this is
ON, the limiter of the other channel will also operate when the limiter of
one channel operates.