Yamaha TX6n Wiring of the [SPEAKERS] Connectors

TX6n/5n/4n Owner’s Manual 13

Wiring of the [SPEAKERS] Connectors

Turn off the POWER switch before connecting external devices to the TXn.

Remove about 13mm of insulation from the end of each

speaker cable, and pass the bare wire through the holes in

the appropriate speaker terminals. Tighten the terminals to

securely clamp the wires. Be sure that the bare wire ends do

not jut out from the terminals and touch the chassis.

From above, insert the Y-plugs all the way into the opening,

and tighten the terminals.

Insert the Speakon cable plug (Neutrik NL4) into the con-

nector, and turn it to the right to lock it.

CHANNEL A

Stereo/Parallel Mode

Bridge Mode

CHANNEL B

5-way Binding Post Connectors

No Plugs

Y-plugs

13mm

0.25"

(6.3mm)

≤0.51"

(12.9mm)

Speakon Connectors

Neutrik Ampliﬁer

1+ A+

1– A–

2+ B+

2– B–

Neutrik Ampliﬁer

1+ +

1–

2+ –

2–

Neutrik Ampliﬁer

1+ B+

1– B–

1–

2–

Neutric NL4 plugs

Contents

Main Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS CAUTION COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) FCC INFORMATION (U.S.A.) PRECAUTIONS 1/2 Do not open * Please keep this manual in a safe place for future reference. CAUTION Backup battery 2/2 Connecting the Plug and Cord IMPORTANT NOTICE FOR THE UNITED KINGDOM Contents Introduction Related manuals and software About Setup Features 1. 2. 2. 1. Connecting the AC Power Cable Switching the Power Status between Standby and On Basic Operation of the TXn Editing the Parameters Panel Operations Operations that can be Performed from the Panel Audio I/O Settings Speakon connectors Channels A and B (analog) or channels 1 and 2 (digital) will operate independently in stereo. 1. 2. Mode Setting 3. 4. 1. 2. 3. 4. Bridge Mode Wiring of the [SPEAKERS] Connectors Turn off the POWER switch before connecting external devices to the TXn. Y-plugs 5-way Binding Post Connectors No Plugs Network Connection Example Troubleshooting Initializing the internal memory 1. 2. 3. ization. When initialization is completed, the amp will automatically restart. Specications General Specications Page Block Diagram Level Diagram DSP Block Diagram Dimensions Current Draw Performance Graph Information for Users on Collection and Disposal of Old Equipment [For business users in the European Union] [Information on Disposal in other Countries outside the European Union] Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogerte [Information fr geschftliche Anwender in der Europischen Union] NORTH AMERICA OCEANIA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST