Yamaha TX6n Basic Operation of the TXn

TX6n/5n/4n Owner’s Manual

9

Basic Operation of the TXn

By pressing a function button you can move to the screen

indicated above that button. By pressing the [HOME] button

you can move to the HOME screen. By pressing the [EXIT]

button you can move to the screen one level above.

Use encoders A and B to move to the parameter that you

want to edit, and use encoder B to edit the value.

• When you edit a parameter in the UTILITY screen,

press the [ENTER] button to conﬁrm it after you ﬁnish

editing. A parameter that has not been conﬁrmed will

ﬂash. If you move the cursor or move to a different

screen without conﬁrming the parameter, your change

will not be applied.

When the display shows the attenuator (i.e., in the HOME

screen or the METER screen), you can use encoders A and B

to adjust each channel’s attenuation.

• If the display shows a screen other than the HOME

screen or METER screen, encoders A and B are used

to set parameters.

To display the meter, access the HOME screen and press the

left-most function button (METER). You can change the

meter type by using the left-most function button (PREV)

and the right-most function button (NEXT).

Panel Operations

Encoder B

[ENTER] button

[EXIT] button

[HOME] button

Function buttons

Encoder A

About the Display

Switching Screens

Editing the Parameters

Shows the names of the screens

assigned to the function buttons.

Shows the contents of the

selected screen.

Shows an alert message if a problem occurs

or if a user-speciﬁed event occurs.

NOTE

Adjusting the Attenuator

Displaying the Meter

NOTE

Attenuator

Level meter

Contents

Main Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS CAUTION COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) FCC INFORMATION (U.S.A.) PRECAUTIONS 1/2 Do not open * Please keep this manual in a safe place for future reference. CAUTION Backup battery 2/2 Connecting the Plug and Cord IMPORTANT NOTICE FOR THE UNITED KINGDOM Contents Introduction Related manuals and software About Setup Features 1. 2. 2. 1. Connecting the AC Power Cable Switching the Power Status between Standby and On Basic Operation of the TXn Editing the Parameters Panel Operations Operations that can be Performed from the Panel Audio I/O Settings Speakon connectors Channels A and B (analog) or channels 1 and 2 (digital) will operate independently in stereo. 1. 2. Mode Setting 3. 4. 1. 2. 3. 4. Bridge Mode Wiring of the [SPEAKERS] Connectors Turn off the POWER switch before connecting external devices to the TXn. Y-plugs 5-way Binding Post Connectors No Plugs Network Connection Example Troubleshooting Initializing the internal memory 1. 2. 3. ization. When initialization is completed, the amp will automatically restart. Specications General Specications Page Block Diagram Level Diagram DSP Block Diagram Dimensions Current Draw Performance Graph Information for Users on Collection and Disposal of Old Equipment [For business users in the European Union] [Information on Disposal in other Countries outside the European Union] Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogerte [Information fr geschftliche Anwender in der Europischen Union] NORTH AMERICA OCEANIA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST