Yamaha TX6n Network Connection Example

TX6n/5n/4n Owner’s Manual

14

Network Connection Example

If you connect the TXn units’ [NETWORK] connector to a computer via an Ethernet cable, you’ll be able to mon-

itor/control the TXn units from Amp Editor. Including computers and other equipment, a total of up to 253 units

can be connected in a single network.

• If you wish to connect multiple TXn units, use a network switch that supports 100Base-TX/10Base-T.

•The Ethernet cable between the network switch and the TXn can be up to 100 meters long. Due to the quality of cables and net-

work switch performance, however, proper operation at the maximum length cannot be guaranteed in some cases.

• Since the TXn supports Auto MDI/MDI-X, it will automatically detect whether the connected cable is of the straight type or

crossover type, and will conﬁgure itself to create the optimal connection. Therefore, you can use either a straight or crossover

cable.

•To prevent electromagnetic interference, use an STP (Shielded Twisted Pair) cable.

•Refer to the Amp Editor Installation Guide and the Amp Editor Owner’s Manual for information on the TXn initial setup for using

the TXn in a network.

Network switch

Ethernet

cable

Ethernet

cable

Device ID: 1

IP Address: 192.168.0.1

Amp Editor

IP Address: 192.168.0.253

Device ID: 2

IP Address: 192.168.0.2

Device ID: 3

IP Address: 192.168.0.3

Device ID: 4

IP Address: 192.168.0.4

Device ID: 5

IP Address: 192.168.0.5

NOTE

Contents

Main Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS CAUTION COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) FCC INFORMATION (U.S.A.) PRECAUTIONS 1/2 Do not open * Please keep this manual in a safe place for future reference. CAUTION Backup battery 2/2 Connecting the Plug and Cord IMPORTANT NOTICE FOR THE UNITED KINGDOM Contents Introduction Related manuals and software About Setup Features 1. 2. 2. 1. Connecting the AC Power Cable Switching the Power Status between Standby and On Basic Operation of the TXn Editing the Parameters Panel Operations Operations that can be Performed from the Panel Audio I/O Settings Speakon connectors Channels A and B (analog) or channels 1 and 2 (digital) will operate independently in stereo. 1. 2. Mode Setting 3. 4. 1. 2. 3. 4. Bridge Mode Wiring of the [SPEAKERS] Connectors Turn off the POWER switch before connecting external devices to the TXn. Y-plugs 5-way Binding Post Connectors No Plugs Network Connection Example Troubleshooting Initializing the internal memory 1. 2. 3. ization. When initialization is completed, the amp will automatically restart. Specications General Specications Page Block Diagram Level Diagram DSP Block Diagram Dimensions Current Draw Performance Graph Information for Users on Collection and Disposal of Old Equipment [For business users in the European Union] [Information on Disposal in other Countries outside the European Union] Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogerte [Information fr geschftliche Anwender in der Europischen Union] NORTH AMERICA OCEANIA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST