20
Installing the Driver
(3) Setting up the OMS driver
1. Start the computer.
2. Make sure that the power to the UX256 is turned off (standby). Then
connect the USB terminal of the computer or the USB hub to the USB
terminal of the UX256.
3. Turn on the power to the UX256. Make sure the red POWER LED and
green USB LED on the UX256 light up steadily.
4. Open the “OMS Applications” folder in the “Opcode” folder installed on
the hard disk, and double-click the “OMS Setup” icon to start the setup
program.
5. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the
subsequent dialog box.
6. The system displays the “Create a New Studio Setup” dialog box. If this
dialog box does not appear, select “New Studio Setup” from the “File”
menu.