18
7. After the search operation is complete, make sure that USB-MIDI 1 is listed in
the OMS Driver Setup dialog, then click [OK].
If the UX96 is not detected correctly, USB-MIDI 1 does not appear. Check the cable
connection and repeat the procedure from the beginning.
If your iMac does not detect the UX96, iMac Update 1.1 may not have been installed.
See page 7 for more information.
The system displays one USB-MIDI x message for each connected UX96.
8. Make sure that USB-MIDI 1 and multiple Port numbers are listed in the OMS
MIDI Device Setup dialog. Check all Ports 16 check boxes.
Click [OK].
9. The system displays a dialog box that enables you to save the setup le. Enter
the le name and click [Save].
NOTE
NOTE
NOTE