Yamaha UX96 THRU output of MIDI signals (MIDI IN MIDI OUT)

24
● THRU output of MIDI signals (MIDI IN → MIDI OUT)
You can route MIDI signals received at the input port(s) of the UX96 directly to
the output port(s) of the UX96 (this is called THRU output). This routing is useful
when you wish to route MIDI signals from a MIDI keyboard directly to a tone
generator. The left column shows the UX96’s output ports (1–6), and the top
column shows the UX96’s input ports (1–2). To enable this function, check the
“Thru ON/OFF” check box in the lower right corner of the screen.
If you check multiple check boxes vertically, a MIDI signal from one input port on
the UX96 is distributed to multiple output ports on the UX96. If you check
multiple check boxes horizontally, MIDI signals from multiple input ports on the
UX96 are merged and transmitted to one output port on the UX96.
See page 20 for more information on the relationship between the UX96’s I/O ports
and the port numbers.
For Macintosh, this function is valid only when the MIDI Patch screen or sequence
software is running.
NOTE
NOTE