Yamaha UX96 Checking the signal path, Changing connections during playback (PC OUT MIDI OUT)

22
● Checking the signal path
To see if the MIDI device is connected correctly, you can try transmitting MIDI
signals.
•Note Off Message
When you click [Send All Note OFF], a MIDI All Note Off message will be sent
to all ports on the UX96.
•Note On Message
When you click [Send All Note On], a MIDI All Note On message will be sent
to all ports on the UX96.
● Changing connections during playback (PC OUT → MIDI OUT)
You can change the I/O assignment of the computer’s output port and the
UX96’s output port. The left column shows the computer’s output ports (OUT 1–
6), and the top column shows the UX96’s output ports (1–6). With the default
settings, ports with the same number are connected to each other. However, you
can change these settings by checking the check boxes.
If you check multiple check boxes vertically, MIDI signals from multiple output
ports on the computer are merged and transmitted to one output port on the
UX96. If you check multiple check boxes horizontally, a MIDI signal from one
output port on the computer is distributed to multiple output ports on the UX96.
See page 20 for more information on the relationship between the UX96’s I/O ports
and the port numbers.
NOTE