20
Getting Started
●
The Controls & Connectors
Rear Panel@1 AC Power Cord Socket
Be sure to plug the VL1’s AC power cord into this socket before plugging the
power cord into an AC outlet.
☛ Getting Started page 22.
@2 POWER Switch
Press to turn power ON or OFF.
@3 OUTPUT L and R Jacks
These are the main stereo outputs from the VL1. Be sure to connect both outputs to
the appropriate channels of a stereo sound system in order to appreciate the full quality of
the VL1 sound and effects.
☛ Getting Started page 24.
@4 FOOT CONTROLLER 1 and 2 Jacks
These jacks accept Yamaha FC7 Foot Controllers which can be used to control any
of the VL1’s controller parameters. One FC7 Foot Controller is supplied with the VL1,
and this should normally be plugged into the FOOT CONTROLLER 2 jack. The second
FC7 foot controller is optional.
☛ Getting Started page 23.
@5 FOOT SWITCH 1 and 2 Jacks
An optional Yamaha FC4 or FC5 footswitch can be connected to one or both of
these jacks for sustain, portamento, and other control functions.
☛ Getting Started page 23.
@6 MIDI IN, OUT and THRU Connectors
The MIDI IN connector receives the data from an external sequencer or other MIDI
device which is to control or transmit data to the VL1. The MIDI THRU connector
simply re-transmits the data received at the MIDI IN connector, allowing convenient
chaining of MIDI devices. The MIDI OUT connector transmits data corresponding to all
VL1 performance operations, or bulk data when one of the MIDI data transmission
functions are activated.
☛ Getting Started page 24.
THRU OUT
MIDI
IN RL
OUTPUT
21
FOOT CONTROLLER
21
FOOT SWITCH
YAMAHA
MODEL VL1
AC INLET
POWER
ON / OFF
@1
AC Power Cord
Socket
@2 POWER Switch
@4
FOOT CONTROLLER 1 and 2 Jacks
@3
OUTPUT L and R Jacks
@5
FOOT SWITCH 1 and 2 Jacks
@6
MIDI IN, OUT and
THRU Connectors