33
Getting Started
Setting Up
Setting Up
7. Load the File
Loading will begin when you press the - button in response to the “Are You
Sure?” prompt. A bar graph on the display will indicate the progress of the load opera-
tion, and when all the data has been loaded “Completed!” will appear.
8. Return to the Play Mode & Eject the Disk
When the “Completed!” display appears, press theP button to return to the
play mode, then press the eject button below the disk drive slot to eject the disk. Store
the disk in a safe place. You must now select a voice in order for the loaded data to be
properly activated — see the following section.

About the VL1 Data Disk

The floppy disk supplied with the VL1 contains the following files:
CUSTOMER:ALL
A complete set of 128 voices and system data in which the voices are
programmed to allow maximum controller variation. The MODULATION 2
wheel should be at its center position for “normal” sound.
FACTORY:ALL
A complete set of 128 voices and system data in which the voices are
programmed for easy playability — the controller range is not as broad as
the CUSTOMER.ALL voices.
EXAMPLE:ALL
Some example voices in which the controller settings are emphasized.