Yamaha XL800 manual Stopping the watercraft

Models: XL800

1 136
Download 136 pages 5.26 Kb
Page 89
Image 89

E

EJU00621

Stopping the watercraft

The watercraft is not equipped with a sep- arate braking system. It is stopped by water resistance when the throttle lever is released. From full speed, the watercraft comes to a complete stop in approximately 105 m (345 ft) after the throttle is released and the engine is stopped, although this dis- tance will vary depending on many factors, including gross weight, water surface condi- tions, and wind direction. The watercraft slows down as soon as the throttle lever is released, but will coast for a distance before fully stopping. If you are not sure you can stop in time before hitting an obstacle, apply throttle and turn in another direction.

WARNING

Allow adequate stopping distance.

Take early action to avoid collisions. Remember, watercraft and other boats do not have brakes.

Operate defensively at safe speeds and keep a safe distance away from people, objects, and other watercraft to give you time to stop.

Do not shut the engine off when slow- ing down in case you need engine power to steer away from a boat or other obstacle that comes into your path.

WARNING

Do not use the reverse function to slow down or stop the watercraft as it could cause you to lose control, be ejected, or impact the handlebars.

3-30

Page 89
Image 89
Yamaha XL800 manual Stopping the watercraft