Fault | Cause | Cure |
|
|
|
Playback sound is muffled and high | ÷ | ÷ Playback in OFF position. |
frequencies are inaudible. | Dolby NR. |
|
| ÷ Heads are dirty. | ÷ Clean heads and carry out demagnetiza- |
| ÷ Heads are magnetized. | tion with head demagnetizer. |
|
|
|
When playing back tapes recorded on | ÷ Basic levels are different for different | ÷ This is not a fault. |
other decks, meter deflections are | cassette decks. |
|
greater (smaller) than when recorded. |
|
|
|
|
|
Recordings cannot be made with | ÷ Protective tabs on cassette have been | ÷ Replace cassette tape, or cover tab |
TIMER REC (deck only plays back) | broken off. | holes with tape, etc. |
(except |
|
|
|
|
|
The remote control transmitter cannot | ÷ The batteries are exhausted. | ÷ Replace batteries. |
be operated. | ÷ The remote control transmitter is operated | ÷ Operate it from less than 7 meters (about |
| from an incorrect distance or angle. | 23 ft.) and 30°. |
| ÷ The remote control sensor is lighted | ÷ Place the unit away from the strong light. |
| strongly. |
|
|
|
|
SPECIFICATIONS
Track Configuration | .................. | 4 track, 2 channel stereo | |
Motor |
|
|
|
DC servo motor (capstan) | |||
|
| Flat torque DC motor (reel) | |
| DC servo motor | ||
Head ......................... | Recording/playback: hard permalloy | ||
|
| Erase: | |
Rapid Transport |
|
|
|
| 90 sec. | ||
| 100 sec. | ||
Wow and Flutter |
|
|
|
|
|
|
|
WRMS .................................................................... |
| 0.05% | |
W.Peak ................................................................ |
| ±0.08% | |
|
|
|
|
WRMS .................................................................... |
| 0.07% | |
W.Peak ................................................................ |
| ±0.12% | |
|
|
| |
|
|
| |
Dolby NR off ......................................................... |
| 60 dB | |
Dolby B NR on ...................................................... |
| 68 dB | |
Dolby C NR on ...................................................... |
| 76 dB | |
Dolby S NR on | .............................. 80 dB | ||
|
|
| |
Dolby NR off ......................................................... |
| 58 dB | |
Dolby B NR on ...................................................... |
| 66 dB | |
Dolby C NR on ...................................................... |
| 74 dB | |
Frequency Response |
|
| |
|
|
| |
Normal tape | 20 ~ 17,000 Hz ±3 dB | ||
CrO2 tape | 20 ~ 18,000 Hz ±3 dB | ||
Metal tape | 20 ~ 20,000 Hz ±3 dB | ||
|
|
| |
Normal tape | 20 ~ 16,000 Hz ±3 dB | ||
CrO2 tape | 20 ~ 17,000 Hz ±3 dB |
Metal tape | 20 ~ 19,000 Hz ±3 dB |
Harmonic Distortion .................................................... | 0.8% |
Input Sensitivity/Impedance |
|
Line ................................................... | 100 mV/50 |
Output Level |
|
Line .................................................. | 570 mV/1.0 |
Phones ................................................... | 1.5 mW/8 ohms |
Channel Separation (1 kHz) ..................................... | 40 dB |
Cross Talk (125 Hz) .................................................. | 55 dB |
GENERAL
Power Supplies |
|
|
U.S.A. and Canada model ........................ | 120 V, 60 Hz | |
Europe model ............................................ | 230 V, 50 Hz | |
U.K. model and Australia model ............. | 240 V, 50 Hz | |
General model ................ | 110/120/220/240 V, 50/60 Hz | |
Power Consumption ........................... | 16 W | |
|
| 12 W |
|
| 5 W (Power off) |
Dimensions (W x H x D) |
|
|
| 435 x 126 x 277 mm | |
| ||
435 x 126 x 285 mm | ||
| ||
Weight |
|
|
4.6 kg (10 lbs. 2 oz.) | ||
| 4.5 kg (9 lbs. 15 oz.) | |
4.4 kg (9 lbs. 11 oz.) | ||
Accessories |
|
|
Output/input cord ..................................................... | 1 pair |
*Specifications subject to change without notice.
17