Yamaha KX 380, KX 480, YHT-580 RECORDING, Preparation for recording, To stop recording:, To stop recording temporarily:, Tape counter and COUNTER RESET button

RECORDING

Preparation for recording

÷Be sure to set the TIMER switch to the OFF position (KX-580 and KX-480 only), then turn on the POWER switch.

÷Set your amplifier or receiver to cassette deck function mode.

	PEAK level MPX FILTER		ŸB/ŸC/
KX-580/KX-480
	REC indicator Tape counter meters	indicator	ŸS(KX-580 only)
			indicators

POWER =ON								6
								2(KX-580 only)
								2
		COUNTER MEMORY			4
	1	COUNTER RESET BIAS ADJUST				5	3	MUTE/SEARCH
KX-380				PEAK level MPX FILTER				6
		REC indicator	Tape counter meters			indicator
POWER =ON
								ŸB/ŸC
								indicators
								2
		COUNTER MEMORY			4
	1	COUNTER RESET				5	3	MUTE/SEARCH
				BIAS ADJUST
1		Insert the cassette	2	KX-580				KX-480/KX-380
	EJECT	with the exposed tape			DOLBY NR			DOLBY NR
		side facing down and
				OFF/ŸB/ŸC/MPX		OFF/ŸS/MPX		OFF/ŸB/ŸC/MPX
		the side to be
		recorded facing you.
		To close the
		compartment, push in
		the compartment door
		until it locks shut.
3	REC/PAUSE	4	5	BALANCE		REC LEVEL		6
		AUTO TAPE		0			5	PLAY
		TUNING			I	4
				I			6
		Play the		2	2	3		7
	]	program		3	3	2		8
		source to be		4	4	I	I0	9
		recorded.		L 5	5 R	0
	REC			* Form of the REC LEVEL control
		See “AUTO TAPE			is slightly different with KX-380.
				See “Setting the recording level”.
		TUNING button”.

To stop recording:

Press the STOP button.

To stop recording temporarily:

Press the REC/PAUSE button. To resume recording, press the PLAY button.

Tape counter and COUNTER RESET button

Before starting recording, press the RESET button to set the counter reading to “0000”. Use this counter to aid in locating a point on a tape.

9