Yamaha KX 380, KX 480, YHT-580 0-M(a section) repeat, Full repeat, To cancel repeat playback, Note:, KX-380, KX-580/KX-480

KX-580/KX-480		REPEAT 0-M/FULL indicator			KX-380
			(KX-580 only)
	MEMORY indicator			PLAY		MEMORY indicator

REPEAT OFF
/0-M/FULL !⁄	MEMORY button !⁄

COUNTER RESET MEMORY button

MEMORY STOP operation - To return to the desired position

Pressing the MEMORY button		During fast forwarding or
memorizes the desired counter		rewinding, the tape will stop at the
reading. The MEMORY indicator		counter reading point where the
lights.	3	MEMORY button was pressed.
MEMORY		!	⁄

or

To cancel the memorized counter reading, press the MEMORY button again. The MEMORY indicator goes out.

MEMORY

REPEAT PLAYBACK ( KX-580 and KX-480 only)

0-M (a section) repeat

With this function, a desired section can be played repeatedly up to 8 times.

1 Press the REPEAT OFF/0-M/FULL button so that the REPEAT 0-M indicator lights.

REPEAT

OFF/0-M/FULL

2 Press the RESET button at the beginning of the section you want to play repeatedly. The counter on the display is reset to "0000".

RESET

3 Press the MEMORY button at the end of the section during playback. The MEMORY indicator on the display lights up, and the tape immediately begins

rewinding.

MEMORY

The tape is rewound until the counter has returned to the beginning of the section. The deck then enters the playback mode and the specified section is played repeatedly.

Full repeat

With this function, the cassette side being played can be repeated up to 8 times.

Press the REPEAT OFF/0-M/FULL button so that the REPEAT FULL indicator lights.

REPEAT

PLAY

OFF/0-M/FULL

3

Note:

The length between the start and end points of the 0-M repeat section should be more than 4 counts.

To cancel repeat playback

To cancel the 0-M repeat or Full repeat, press the REPEAT OFF/0-M/FULL button so that both REPEAT 0-M and REPEAT FULL indicators go off. Each time this button is pressed, repeat mode switches as follows:

30-M repeat 3 Full repeat 3OFF

8