Step

— Quick Guide —

1

Changing the Voices

Turn the power on and adjust the volume

Turning the power on

Press the [STANDBY/ON] switch to turn on the power.

Press the [STANDBY/ON] switch again to turn the power off.

Adjusting the volume

When turning the power on, bars appear at the left side in the display to indicate the value of the master volume.

001 GrandPno

001

The volume increases as indicated by the bars in the display.

When you first turn on the power, make sure to turn down the volume of the instrument by pressing the MASTER VOLUME [-] button several times. While playing the keyboard, adjust the volume level by using the MASTER VOLUME [+] and [-] buttons.

Press the [+] button to increase the volume.

Press the [-] button to lower the volume.

When the power is turned on, the initial value is automatically set to 12 (indicated by six bars in the display).

If you are using the instrument in a quiet place and want a lower volume setting to start with, simultaneously hold down the MASTER VOLUME [-] button and turn on the power with the [STANDBY/ON] switch. This automatically sets the value to 4 (indicated by two bars).

NOTE

The value of master volume cannot be saved.

12 PSR-E213/YPT-210 Owner’s Manual