Setting Up
Make all necessary connections BEFORE turning the power on.Connecting headphones (PHONES/OUTPUT Jack)
The
You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other
WARNING
•Avoid listening with the headphones at high volume for long periods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing.
CAUTION
•To prevent damage to the speakers, set the volume of the external devices at the minimum setting and turn power off the devices before connecting them. Failure to observe these precautions may result in electric shock or equipment damage. Also, be sure to set the volumes of external devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.
Connecting a footswitch (SUSTAIN Jack)The sustain function lets you produce a natural sustain as you play by pressing an optional footswitch. Plug the Yamaha FC4 or FC5 footswitch into this jack and use it to switch sustain on and off.
NOTE
•Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.
•Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, result- ing in reversed footswitch operation.
Using the MIDI Terminals
other MIDI instrument
The instrument also features MIDI terminals, allowing you to interface the instrument with other MIDI instruments or computers. (For more information, see page 50.)
NOTE
•MIDI cables (sold separately) must be used for connecting to MIDI devices. They can be bought at music stores, etc.
Turn on the power
Press the [STANDBY/ON] switch to turn on the power. Pressing the switch again turns the power off. When you first turn on the power, make sure to turn down the volume of the instrument by pressing the MASTER VOLUME
All panel settings as well as the settings made via the display are reset to their default values whenever the power is turned off.
CAUTION
•When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument.When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet, and/or remove the batteries from the instrument.
9 |