CONTROLS AND THEIR FUNCTIONS
7STANDBY/ON switch
Press this switch to turn on the power when the POWER switch is set in the ON position (the status indicator lights up in green). Press again to set the subwoofer in the standby mode (the status indicator goes off).
Note
Even while the subwoofer is in the standby mode, it is still using a small amount of power.
8Status indicator
Lights up in green while the subwoofer is on. Lights up in red while the subwoofer is set in the standby mode by the operation of the automatic power- switching function.
Goes off when the subwoofer is set in the standby mode.
9HIGH CUT control
Adjusts the high frequency cut off point. Frequencies higher than the frequency selected by this control are all cut off (and no output). One graduation of this control represents 10 Hz.
0VOLUME control
Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume.
English |
5En