Yamaha YST-SW45 Using two units, Connecting to this unit’s OUTPUT/INPUT terminals

Using two units

Disconnect your main speakers from the amplifier if connected, and connect them to the speaker terminals of this unit.

Right speaker

Left speaker

OUTPUT	INPUT2	AUTO	OUTPUT	INPUT2	AUTO
TO SPEAKERS		STANDBY	TO SPEAKERS		STANDBY

This unit	This unit
LOW HIGH	LOW HIGH
OFF	OFF
FROM AMPLIFIER	FROM AMPLIFIER
INPUT1	INPUT1

Amplifier

To AC outlet	To AC outlet
	Speaker terminals

English

Connecting to this unit’s OUTPUT/INPUT terminals

For connections, keep the speaker wires as short as possible. (Cut the excessive wire, if necessary.) If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, by observing + and – markings. If these wires are reversed, the sound will be unnatural and will lack bass.

Do not let the core of the speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers.

How to Connect:

Red: positive (+)

Black: negative (–)

1 Unscrew the knob.

2 Insert the core of the wire. [Remove approx. 5 mm (1/4”) insulation from the speaker wires.]

3 Tighten the knob to secure the wire firmly.

*Banana Plug connections are also possible (except for U.K. and Europe models). Simply insert the Banana Plug con- nector into the corresponding terminal.