Yamaha YST-SW45 CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER, Using one unit, Using two units

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER

•Connect the main speakers to the speaker output terminals of the amplifier.

•Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.

•To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal.

Using one unit

Left speaker	This unit		Right speaker
	OUTPUT	INPUT2 AUTO
	TO SPEAKERS	STANDBY
		LOW HIGH
	FROM AMPLIFIER	OFF
	INPUT1
	To AC outlet	‹YAMAHA DSP amplifier›	Pin plug
			cords
		SUBWOOFER
	Amplifier	‹Amplifier›

PRE OUT

Using two units

Left speaker Right speaker

OUTPUT	INPUT2 AUTO	OUTPUT	INPUT2 AUTO
TO SPEAKERS	STANDBY	TO SPEAKERS	STANDBY
	LOW HIGH		LOW HIGH
FROM AMPLIFIER	OFF	FROM AMPLIFIER	OFF
INPUT1		INPUT1
This unit	This unit

Pin plug cords

Amplifier

To AC outlet To AC outlet

Notes on the above connections

•When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound.

•When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.

•For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 6.)

8