PERIODIC MAINTENANCE AND ADJUSTMENT
1
1.Oil filler cap
4.Install the engine oil drain bolt, and then tighten it to the specified torque.
6
1
1. Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m • kgf, 14.5 ft • lbf)
5.Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap.
Recommended engine oil:
See page
Oil change quantity:
0.85 L (0.90 US qt, 0.75 Imp.qt)
ECA11670
NOTICE
●Do not use oils with a diesel specification of “CD” or oils of a higher quality than specified. In addition, do not use oils labeled “ENERGY CONSERVING II” or higher.
●Be sure no foreign material en- ters the crankcase.
immediately turn the engine off and check for the cause.
7.Turn the engine off, and then check the oil level and correct it if neces- sary.
6.Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking,